Setting Up/Changing Network Settings on a WiFi Device

Overview

This  guide provides a walkthrough on how to change the Network Settings  between both a LAN and WiFi connection. In order to make this change  users will need to access the Developer Mode Console (10.99.99.1) on the  WiFi device.

 

Steps

  1. Connect the WiFi device to your computer with an ethernet cable  via the PC port on the device, and access the Developer Mode Console  (10.99.99.1).
     
  2. After successfully accessing the console,  navigate to and click on the "Connection Settings" tab. If prompted for  login credentials, enter admin as the username and password as the  password in order to gain access to the page.

 User-added image

WiFi to Lan/Ethernet 

  1. When changing your device from a WiFi connection to a wired LAN  connection, ensure that the device has an additional ethernet cable  plugged into the "Internet" port on the device. This ethernet cable  should connect to your router/modem.
     
  2. On the "Connection  Settings" console tab, click on the drop down box listed in the "Connect  to Internet Via" field and select the "Ethernet" option.

    User-added image 
  3. After selecting Ethernet, your field of options should change.

    User-added image 
  4. In  the "Obtain WAN IP Via" field users should make sure DHCP is selected,  and then click "Save Settings" which will cause the device to reset and  reconfigure.
     
  5. If you are looking to setup the device with a  Static IP address, in the drop down box under the "Obtain WAN IP Via"  field select "Use Static IP".

    User-added image 
  6. In  order to configure the Static IP for the device, users should contact  their Network Administrator to inquire about the remaining open fields.  Once the information is entered, click save and the device will reset  and connect to the network.

LAN/Ethernet to WiFi

  1. In the "Connection Settings" console tab, click on the drop down  box listed in the "Connect to Internet Via" field and select the "WiFi"  option.

    User-added image 
  2. After selecting Ethernet, your field of options should change.

    User-added image 
  3. In  order to find your WiFi network, click on the scan button and select  the correct network from the list. Once the network is selected, the  device should recognize the "Encryption type" and fill in the field for  you.
     
  4. Enter the log in password for your WiFi network.  After this, make sure that DHCP is selected, then click "Save Settings"  which will cause the device to reset and reconfigure.

    User-added image 
  5. If  you are looking to setup the device with a Static IP address, in the  drop down box under the "Obtain WAN IP Via" field select "Use Static  IP".

    User-added image 
  6. In  order to configure the Static IP for the device, users should contact  their Network Administrator to inquire about the remaining open fields.  Once the information is entered, click save and the device will reset  and connect to the network.

Was this article helpful?

Contact Support